Everything for the X19 Braking system
A brake caliper bracket for the front or rear calipers for several Fiat and Lancia models. Contains caliper support springs.
Front brake caliper for 1500 models.
Please select NS (left) or OS (right) from drop down menu.
You can also choose from new or used units
Used units receive a £20 discount
The Used units will be checked and have new bleed screws fitted before being sent off, condition varies but they will always be working 100%
We can also offer an exchange service for you old calipers, please call for details. Please note new units can take upto 10 days to arrive to us as we only order these now when required.
New parts carry a 30% restocking charge and 20% if returned unless faulty.
Fiat X19 Brake fluid Cap
Anti-rattle springs for the front wheels of any model year 74-88 Fiat or Bertone X1/9.
sold in pairs, two required per wheel.
Stops the brake pads from rattling in clamps
Copper crush washer for both 1300 and 1500 models.
Brake Pipe Flaring Kit
A pair of brake caliper sliders for any model year Fiat X19.
Sold in pairs
Fiat X19 Cupro-Nickle Brake Pipe
25ft (7.5mtr) Length
Also have the brake pipe union nuts and pipe flaring tools in the brake section
Suitable for 7 or 8mm fittings (some 8mm fittings can be tight, lubricate fitting and place hose in hot water for a few minutes before fitting, secure in place with clamp)
Sold in 100mm lengths, (10 x 100mm lengths will give you 1mtr) Order as much as you like and will be sent as one length. So if you order 3 units you will receive a continuous 300mm length etc.
7.5mm ID x 13mm OD This is OEM equipment as used on BMW, Porsche, Mercedes to name a few OEM cars use this for resevoir feed hose, gravity feed to master cylinder from reservoir, suitable for all types of brake fluidThis is the only industry OEM supplied for brake fluid that supplier will give a Written Guarantee that this hose will not fail using with brake fluid.
Brake dust shield for the front for Fiat X1/9's
Used condition, and will be cleaned up before sending.
We can also chemically treat these, blast them off and respray them
if required, please enquire for costs.
Black Handled Handbrake for Fiat X19.
Fiat X19 Black rubber handbrake gator / Boot
Fully stainless steel brake hose kit, no rubbish plated fittings like some certain products on the market, this is the real deal.
4 x Stainless Steel Brake Lines
2 x Stainless Steel Banjo Bolts
6 x Copper Washers
These pipes will not flex and expand, like the rubber original equipment. They are made from PTFE lined Stainless Steel Reinforced hose that is coated in a clear protective covering. Which all helps to keep them clean and free from corrosion.
You will benefit from better braking performance using these pipes over the standard ones
Available in various colours, see colour chart pic (No Extra charge for colours)
Supplied as a set of four to replace all brake calipers.
Set of 4 x Brake Bleed Screws for hydraulic bleeding
All Fiat X19 Brake Calipers and Wheel Cylinders
Brand new fiat x19 brake master cylinder.
fits all x19 models
Tarox G88 Discs
227mm x 11mm x 56mm.
The G88 is probably the best known of all TAROX discs and the most instantly recognisable with its multiple radial grooves on the braking surface of the discs.
These grooves are designed to generate a turbine effect which dissipates heat build up, allowing the discs to run cooler and reducing the possibility of warping, vibration or cracking.
All G88 discs are heat treated for strength, hand finished to ensure the smoothest possible braking surface and TÜV approved
Priced per pair